PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN515-416R32
AN515-416R32 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.175 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN, thread_length: 1.937 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN, screw_material: STEEL COMP 1010. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-144-3782, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN515-416R32
NSN: 5305-00-144-3782
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleROUND
head_height0.175 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
thread_length1.937 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1010
fastener_length1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentCADMIUM
thread_quantity_per_inch20
NSN5305-00-144-3782
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN515-416R32 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: III TYPE AND 1C STYLE
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
HEAD HEIGHT: 0.175 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
•
SCREW MATERIAL: STEEL COMP 1010
•
SCREW SURFACE TREATMENT: CADMIUM
•
THREAD QUANTITY PER INCH: 20
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATAIII TYPE AND 1C STYLE
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD HEIGHT0.175 INCHES MAXIMUM IN
HEAD DIAMETER0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW MATERIALSTEEL COMP 1010
SCREW SURFACE TREATMENTCADMIUM
THREAD QUANTITY PER INCH20
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD LENGTH1.937 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
FFS92ANDTYPE3STYLE1CInterchangeable
interchangeable cross-reference
interchangeable
AN515-8R12Interchangeable
interchangeable cross-reference
interchangeable
808P107CInterchangeable
interchangeable cross-reference
interchangeable
784-8-20Interchangeable
interchangeable cross-reference
interchangeable
AN515-8R20Interchangeable
interchangeable cross-reference
interchangeable
1177-8-20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN515-416R32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN515-416R32?
AN515-416R32 is a SCREW,MACHINE.
What parts can replace AN515-416R32?
There are 18 known substitutes for AN515-416R32: FFS92ANDTYPE3STYLE1C, AN515-8R12, 808P107C and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN515-416R32?
AN515-416R32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-144-3782. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN515-416R32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026