PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN515-3-4
AN515-3-4 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.078 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.169 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN, thread_length: 0.208 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, screw_material: STEEL COMP 1010. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-3566, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN515-3-4
NSN: 5305-00-151-3566
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleROUND
head_height0.078 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.169 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
thread_length0.208 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1010
fastener_length0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.099 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-151-3566
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN515-3-4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.078 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A575 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A576 ASSN STD SINGLE MATERIAL RESPONSE
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
•
THREAD CLASS: 2A A
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HEAD DIAMETER: 0.169 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.078 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A575 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A576 ASSN STD SINGLE MATERIAL RESPONSE
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
THREAD CLASS2A A
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD DIAMETER0.169 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
NOMINAL THREAD DIAMETER0.099 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
902040K1Interchangeable
interchangeable cross-reference
interchangeable
6331Interchangeable
interchangeable cross-reference
interchangeable
AN515-8-5Interchangeable
interchangeable cross-reference
interchangeable
6105Interchangeable
interchangeable cross-reference
interchangeable
FFS92ANDTYPE1STYLE1SInterchangeable
interchangeable cross-reference
interchangeable
AN515-2-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN515-3-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN515-3-4?
AN515-3-4 is a SCREW,MACHINE.
What parts can replace AN515-3-4?
There are 12 known substitutes for AN515-3-4: 902040K1, 6331, AN515-8-5 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN515-3-4?
AN515-3-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-3566. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN515-3-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026