PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN515-2-12
AN515-2-12 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN, thread_length: 0.714 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, screw_material: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-3563, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN515-2-12
NSN: 5305-00-151-3563
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_stylePAN
head_height0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
thread_length0.714 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-151-3563
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN515-2-12 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 56
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1S STYLE
•
HEAD HEIGHT: 0.086 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HEAD DIAMETER: 0.146 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH56
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1S STYLE
HEAD HEIGHT0.086 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD DIAMETER0.146 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
THREAD LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
INTERNAL DRIVE STYLESLOT
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 1010
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
902040K1Interchangeable
interchangeable cross-reference
interchangeable
6331Interchangeable
interchangeable cross-reference
interchangeable
AN515-8-5Interchangeable
interchangeable cross-reference
interchangeable
6105Interchangeable
interchangeable cross-reference
interchangeable
FFS92ANDTYPE1STYLE1SInterchangeable
interchangeable cross-reference
interchangeable
AN515-2-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN515-2-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN515-2-12?
AN515-2-12 is a SCREW,MACHINE.
What parts can replace AN515-2-12?
There are 15 known substitutes for AN515-2-12: 902040K1, 6331, AN515-8-5 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN515-2-12?
AN515-2-12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-3563. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN515-2-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026