PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN505-4-6
AN505-4-6 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, screw_material: STEEL OR STEEL COMP 1010, fastener_length: 0.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-0933, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN505-4-6
NSN: 5305-00-151-0933
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
screw_materialSTEEL OR STEEL COMP 1010
fastener_length0.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-151-0933
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN505-4-6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
•
SCREW SURFACE TREATMENT: CADMIUM
•
THREAD CLASS: 2A A
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
SCREW SURFACE TREATMENTCADMIUM
THREAD CLASS2A A
NOMINAL THREAD DIAMETER0.112 INCHES IN
SCREW MATERIALSTEEL OR STEEL COMP 1010
THREAD LENGTH0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
0875Interchangeable
interchangeable cross-reference
interchangeable
3525099Interchangeable
interchangeable cross-reference
interchangeable
A08094Interchangeable
interchangeable cross-reference
interchangeable
876Interchangeable
interchangeable cross-reference
interchangeable
20507-50Interchangeable
Same NIIN cross-reference
interchangeable
FFS92TYPE1STYLE2SInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN505-4-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN505-4-6?
AN505-4-6 is a SCREW,MACHINE.
What parts can replace AN505-4-6?
There are 8 known substitutes for AN505-4-6: 0875, 3525099, A08094 and 5 more. Substitute compatibility should be verified for your specific system.
Is AN505-4-6 still available?
AN505-4-6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN505-4-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026