PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN501-10-10
AN501-10-10 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.288 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, thread_length: 0.625 INCHES NOMINAL IN, screw_material: STEEL COMP 1010. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-458-7906, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN501-10-10
NSN: 5305-01-458-7906
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.288 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
thread_length0.625 INCHES NOMINAL IN
screw_materialSTEEL COMP 1010
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNF
NSN5305-01-458-7906
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN501-10-10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNF
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD QUANTITY PER INCH: 32
•
THREAD CLASS: 2A A
•
HEAD STYLE: FILLISTER
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNF
INTERNAL DRIVE STYLESLOT
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH32
THREAD CLASS2A A
HEAD STYLEFILLISTER
FASTENER LENGTH0.625 INCHES NOMINAL IN
HEAD HEIGHT0.288 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
THREAD LENGTH0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
NASM501Interchangeable
interchangeable cross-reference
interchangeable
AN501A5-6Interchangeable
interchangeable cross-reference
interchangeable
AN501-10-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN501-10-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN501-10-10?
AN501-10-10 is a SCREW,MACHINE.
What parts can replace AN501-10-10?
There are 3 known substitutes for AN501-10-10: NASM501, AN501A5-6, AN501-10-6. Substitute compatibility should be verified for your specific system.
What is the NSN for AN501-10-10?
AN501-10-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-458-7906. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN501-10-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026