PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN500D4-4
AN500D4-4 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN, thread_length: 0.250 INCHES NOMINAL IN, screw_material: STEEL CORROSION RESISTING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-922-8778, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN500D4-4
NSN: 5305-00-922-8778
FSC: 5305
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
head_styleFILLISTER
head_height0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
thread_length0.250 INCHES NOMINAL IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-922-8778
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN500D4-4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 5S STYLE
•
HEAD STYLE: FILLISTER
•
FASTENER LENGTH: 0.250 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: SLOT
•
HEAD DIAMETER: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 81348-FFS92 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.086 INCHES IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 5S STYLE
HEAD STYLEFILLISTER
FASTENER LENGTH0.250 INCHES MAXIMUM IN
INTERNAL DRIVE STYLESLOT
HEAD DIAMETER0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
TEST DATA DOCUMENT81348-FFS92 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD LENGTH0.250 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
697052-124Interchangeable
interchangeable cross-reference
interchangeable
5N5102-011-24Interchangeable
interchangeable cross-reference
interchangeable
411336-1113Interchangeable
interchangeable cross-reference
interchangeable
1913122Interchangeable
interchangeable cross-reference
interchangeable
164-02Interchangeable
interchangeable cross-reference
interchangeable
207-1009-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN500D4-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN500D4-4?
AN500D4-4 is a SCREW,MACHINE.
What parts can replace AN500D4-4?
There are 27 known substitutes for AN500D4-4: 697052-124, 5N5102-011-24, 411336-1113 and 24 more. Substitute compatibility should be verified for your specific system.
Is AN500D4-4 still available?
AN500D4-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN500D4-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026