AN500A4-5 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

AN500A4-5: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN, hole_diameter: 0.037 INCHES NOMINAL IN, thread_length: 0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-151-0398, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AN500A4-5

NSN: 5305-00-151-0398
FSC: 5305 — Screws
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)

SPECIFICATIONS

head_style	FILLISTER
head_height	0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
thread_class	2A A
head_diameter	0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
hole_diameter	0.037 INCHES NOMINAL IN
hole_quantity	1
thread_length	0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
screw_material	STEEL OR STEEL COMP 1010
fastener_length	0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
internal_drive_style	CROSS RECESS TYPE 1
nominal_thread_diameter	0.112 INCHES IN
NSN	5305-00-151-0398

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN

•

SCREW SURFACE TREATMENT: CADMIUM

•

FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE

•

THREAD LENGTH: 0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.112 INCHES IN

•

HEAD STYLE: FILLISTER

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT	CADMIUM
FASTENER LENGTH	0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
THREAD LENGTH	0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.112 INCHES IN
HEAD STYLE	FILLISTER
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	STEEL OR STEEL COMP 1010
MINIMUM TENSILE STRENGTH	60000 POUNDS PER SQUARE INCH LBS

SUBSTITUTES & CROSS-REFERENCES 4

24849-003Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

FFS92Reference document

Same NSN cross-reference

Reference document — Identification reference

861839Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

10196104Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy AN500A4-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AN500A4-5?

AN500A4-5 is a SCREW,MACHINE.

What parts can replace AN500A4-5?

There are 4 known substitutes for AN500A4-5: 24849-003, FFS92, 861839 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AN500A4-5?

AN500A4-5 is cataloged in the U.S. Government catalog under NSN 5305-00-151-0398. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AN500A4-5 — SCREW,MACHINE

Request a Quote — AN500A4-5