AN500A2-12 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

AN500A2-12: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.055 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, hole_diameter: 0.031 INCHES NOMINAL IN, thread_length: 0.714 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-616-8928, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AN500A2-12

NSN: 5305-00-616-8928
FSC: 5305 — Screws
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)

SPECIFICATIONS

head_style	FILLISTER
head_height	0.055 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
thread_class	2A A
head_diameter	0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
hole_diameter	0.031 INCHES NOMINAL IN
hole_quantity	1
thread_length	0.714 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
screw_material	STEEL
fastener_length	0.750 INCHES NOMINAL IN
thread_direction	RIGHT-HAND
internal_drive_style	SLOT
nominal_thread_diameter	0.086 INCHES IN
NSN	5305-00-616-8928

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.055 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN

•

SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE

•

FASTENER LENGTH: 0.750 INCHES NOMINAL IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE

•

THREAD LENGTH: 0.714 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.086 INCHES IN

•

HEAD STYLE: FILLISTER

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.055 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT	CADMIUM AND CHROMATE
FASTENER LENGTH	0.750 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH	0.714 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.086 INCHES IN
HEAD STYLE	FILLISTER
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	STEEL
MINIMUM TENSILE STRENGTH	55000 POUNDS PER SQUARE INCH LBS

SUBSTITUTES & CROSS-REFERENCES 3

AC500A2-12Reference document

Same NSN cross-reference

Reference document — Secondary reference

23951Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS35265-9Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AN500A2-12?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AN500A2-12?

AN500A2-12 is a SCREW,MACHINE.

What parts can replace AN500A2-12?

There are 3 known substitutes for AN500A2-12: AC500A2-12, 23951, MS35265-9. Substitute compatibility should be verified for your specific system.

What is the NSN for AN500A2-12?

AN500A2-12 is cataloged in the U.S. Government catalog under NSN 5305-00-616-8928. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AN500A2-12 — SCREW,MACHINE

Request a Quote — AN500A2-12