AN500A10-8 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

AN500A10-8: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, hole_diameter: 0.046 INCHES NOMINAL IN, thread_length: 0.500 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-151-0355, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AN500A10-8

NSN: 5305-00-151-0355
FSC: 5305 — Screws
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)

SPECIFICATIONS

head_style	FILLISTER
head_height	0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class	2A A
head_diameter	0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
hole_diameter	0.046 INCHES NOMINAL IN
hole_quantity	1
thread_length	0.500 INCHES MINIMUM IN
screw_material	STEEL
fastener_length	0.500 INCHES NOMINAL IN
thread_direction	RIGHT-HAND
internal_drive_style	SLOT
nominal_thread_diameter	0.190 INCHES IN
NSN	5305-00-151-0355

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN

•

SCREW SURFACE TREATMENT: CADMIUM

•

FASTENER LENGTH: 0.500 INCHES NOMINAL IN

•

THREAD LENGTH: 0.500 INCHES MINIMUM IN

•

NOMINAL THREAD DIAMETER: 0.190 INCHES IN

•

HEAD STYLE: FILLISTER

•

THREAD DIRECTION: RIGHT-HAND

•

NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 5S STYLE

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT	CADMIUM
FASTENER LENGTH	0.500 INCHES NOMINAL IN
THREAD LENGTH	0.500 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER	0.190 INCHES IN
HEAD STYLE	FILLISTER
THREAD DIRECTION	RIGHT-HAND
NONDEFINITIVE SPEC/STD DATA	1 TYPE AND 5S STYLE
SCREW MATERIAL	STEEL
MINIMUM TENSILE STRENGTH	60000 POUNDS PER SQUARE INCH LBS

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753

SUBSTITUTES & CROSS-REFERENCES 2

1205386Reference document

Same NSN cross-reference

Reference document — Secondary reference

FFS92Reference document

Same NSN cross-reference

Reference document — Identification reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy AN500A10-8?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AN500A10-8?

AN500A10-8 is a SCREW,MACHINE.

What parts can replace AN500A10-8?

There are 2 known substitutes for AN500A10-8: 1205386, FFS92. Substitute compatibility should be verified for your specific system.

What is the NSN for AN500A10-8?

AN500A10-8 is cataloged in the U.S. Government catalog under NSN 5305-00-151-0355. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AN500A10-8 — SCREW,MACHINE

Request a Quote — AN500A10-8