AN500-6-5 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

AN500-6-5: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN, hole_diameter: 0.046 INCHES NOMINAL IN, thread_length: 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-013-1885, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AN500-6-5

NSN: 5305-00-013-1885
NIINs: 000131885, 005432394
FSC: 5305 — Screws
CAGE: 81352 — AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP

SPECIFICATIONS

head_style	FILLISTER
head_height	0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
thread_class	2A A
head_diameter	0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
hole_diameter	0.046 INCHES NOMINAL IN
hole_quantity	1
thread_length	0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
screw_material	STEEL
fastener_length	0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
internal_drive_style	SLOT
nominal_thread_diameter	0.138 INCHES IN
NSN	5305-00-013-1885

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN

•

SCREW SURFACE TREATMENT: CADMIUM OR ZINC

•

FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES

•

THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.138 INCHES IN

•

HEAD STYLE: FILLISTER

•

INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT	CADMIUM OR ZINC
FASTENER LENGTH	0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	SAE ASSN STD ALL MATERIAL RESPONSES
THREAD LENGTH	0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.138 INCHES IN
HEAD STYLE	FILLISTER
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
THREAD CLASS	2A A
THREAD QUANTITY PER INCH	32

SUBSTITUTES & CROSS-REFERENCES 8

31036S7Reference document

Same NSN cross-reference

Reference document — Secondary reference

AC500-6-5Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

296B70Reference document

Same NSN cross-reference

Reference document — Secondary reference

FFS92ANDTYPE1ANDSTYLE4SReference document

Same NSN cross-reference

Reference document — Identification reference

20506-65Reference document

Same NSN cross-reference

Reference document — Secondary reference

62-312C2-89Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy AN500-6-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AN500-6-5?

AN500-6-5 is a SCREW,MACHINE.

What parts can replace AN500-6-5?

There are 8 known substitutes for AN500-6-5: 31036S7, AC500-6-5, 296B70 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AN500-6-5?

AN500-6-5 is cataloged in the U.S. Government catalog under NSN 5305-00-013-1885. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AN500-6-5 — SCREW,MACHINE

Request a Quote — AN500-6-5