PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN500-5-3
AN500-5-3 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.081 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.187 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN, thread_length: 0.138 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN, screw_material: STEEL OR STEEL COMP 1010. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-843-8278, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN500-5-3
NSN: 5305-00-843-8278
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.081 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.187 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
thread_length0.138 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
screw_materialSTEEL OR STEEL COMP 1010
fastener_length0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.125 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
NSN5305-00-843-8278
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN500-5-3 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD HEIGHT: 0.081 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.138 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 40
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
•
FASTENER LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
HEAD HEIGHT0.081 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
THREAD LENGTH0.138 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH40
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
FASTENER LENGTH0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
THREAD CLASS2A A
SCREW MATERIALSTEEL OR STEEL COMP 1010
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
38271Interchangeable
interchangeable cross-reference
interchangeable
5305005791267Interchangeable
interchangeable cross-reference
interchangeable
18313Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN500-5-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN500-5-3?
AN500-5-3 is a SCREW,MACHINE.
What parts can replace AN500-5-3?
There are 3 known substitutes for AN500-5-3: 38271, 5305005791267, 18313. Substitute compatibility should be verified for your specific system.
What is the NSN for AN500-5-3?
AN500-5-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-843-8278. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN500-5-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026