AN500-2-3 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

AN500-2-3: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.055 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, thread_length: 0.152 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN, screw_material: STEEL OR STEEL COMP 1010. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-151-2995, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AN500-2-3

NSN: 5305-00-151-2995
FSC: 5305 — Screws
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)

SPECIFICATIONS

head_style	FILLISTER
head_height	0.055 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
thread_class	2A A
head_diameter	0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
thread_length	0.152 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
screw_material	STEEL OR STEEL COMP 1010
fastener_length	0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
internal_drive_style	CROSS RECESS TYPE 1
nominal_thread_diameter	0.086 INCHES IN
screw_surface_treatment	CADMIUM
minimum_tensile_strength	60000 POUNDS PER SQUARE INCH LBS
NSN	5305-00-151-2995

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.055 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN

•

SCREW SURFACE TREATMENT: CADMIUM

•

FASTENER LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE

•

THREAD LENGTH: 0.152 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.086 INCHES IN

•

HEAD STYLE: FILLISTER

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.055 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT	CADMIUM
FASTENER LENGTH	0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
THREAD LENGTH	0.152 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.086 INCHES IN
HEAD STYLE	FILLISTER
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	STEEL OR STEEL COMP 1010
MINIMUM TENSILE STRENGTH	60000 POUNDS PER SQUARE INCH LBS

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831

SUBSTITUTES & CROSS-REFERENCES 2

S900060-5Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

FFS92ANDTYPE1ANDSTYLE4SReference document

Same NSN cross-reference

Reference document — Identification reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy AN500-2-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AN500-2-3?

AN500-2-3 is a SCREW,MACHINE.

What parts can replace AN500-2-3?

There are 2 known substitutes for AN500-2-3: S900060-5, FFS92ANDTYPE1ANDSTYLE4S. Substitute compatibility should be verified for your specific system.

What is the NSN for AN500-2-3?

AN500-2-3 is cataloged in the U.S. Government catalog under NSN 5305-00-151-2995. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AN500-2-3 — SCREW,MACHINE

Request a Quote — AN500-2-3