PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN500-10-8
AN500-10-8 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, thread_length: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, screw_material: STEEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-2927, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN500-10-8
NSN: 5305-00-151-2927
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
thread_length0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
NSN5305-00-151-2927
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN500-10-8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
•
SCREW MATERIAL: STEEL
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 24
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
SCREW MATERIALSTEEL
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
HEAD DIAMETER0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD DIAMETER0.190 INCHES IN
INTERNAL DRIVE STYLESLOT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
PMA-4L4718Interchangeable
interchangeable cross-reference
interchangeable
AF-333Interchangeable
interchangeable cross-reference
interchangeable
2853Interchangeable
interchangeable cross-reference
interchangeable
ERL-12-1Interchangeable
interchangeable cross-reference
interchangeable
92954Interchangeable
interchangeable cross-reference
interchangeable
GGG-C-755Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN500-10-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN500-10-8?
AN500-10-8 is a SCREW,MACHINE.
What parts can replace AN500-10-8?
There are 15 known substitutes for AN500-10-8: PMA-4L4718, AF-333, 2853 and 12 more. Substitute compatibility should be verified for your specific system.
Is AN500-10-8 still available?
AN500-10-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN500-10-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026