PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN500-10-10
AN500-10-10 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN, hole_diameter: 0.046 INCHES NOMINAL IN, thread_length: 0.542 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-418-2533, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN500-10-10
NSN: 5305-00-418-2533
FSC: 5305
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.292 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN
hole_diameter0.046 INCHES NOMINAL IN
hole_quantity1
thread_length0.542 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
NSN5305-00-418-2533
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN500-10-10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.824 INCHES MINIMUM AND 0.917 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
SCREW MATERIAL: COPPER ALLOY
•
THREAD SERIES DESIGNATOR: UNF
•
TEST DATA DOCUMENT: 36659-LC+72-1238 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
•
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.824 INCHES MINIMUM AND 0.917 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
NOMINAL THREAD DIAMETER0.190 INCHES IN
SCREW MATERIALCOPPER ALLOY
THREAD SERIES DESIGNATORUNF
TEST DATA DOCUMENT36659-LC+72-1238 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
FASTENER LENGTH0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
HEAD DIAMETER0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
THREAD CLASS2A A
THREAD QUANTITY PER INCH32
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
178554-6Interchangeable
interchangeable cross-reference
interchangeable
110488Interchangeable
interchangeable cross-reference
interchangeable
5305009140245Interchangeable
interchangeable cross-reference
interchangeable
FFS92Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN500-10-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN500-10-10?
AN500-10-10 is a SCREW,MACHINE.
What parts can replace AN500-10-10?
There are 4 known substitutes for AN500-10-10: 178554-6, 110488, 5305009140245 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN500-10-10?
AN500-10-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-418-2533. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN500-10-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026