AN426DD8-10 — RIVET,SOLID

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

AN426DD8-10: RIVET,SOLID.

The RIVET,SOLID is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7050 OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, shank_style: STRAIGHT W/RADIUS CHAMFERED TIP, heat_treatment: T-73 SOLUTION HEAT TREATED OVERALL, shank_diameter: 0.249 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-117-7238, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AN426DD8-10

NSN: 5320-00-117-7238
FSC: 5320 — Rivets
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY 7050 OVERALL
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
grip_length	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
shank_style	STRAIGHT W/RADIUS CHAMFERED TIP
heat_treatment	T-73 SOLUTION HEAT TREATED OVERALL
shank_diameter	0.249 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN
shear_strength	41000 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
countersink_angle	99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
surface_treatment	ANODIZE OR CHROMATE OVERALL
head_major_diameter	0.472 INCHES MINIMUM AND 0.480 INCHES MAXIMUM IN
material_document_and_classification	QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	5320-00-117-7238

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.249 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL

•

HEAT TREATMENT: T-73 SOLUTION HEAT TREATED OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN

•

SHANK STYLE: STRAIGHT W/RADIUS CHAMFERED TIP

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.249 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN
FASTENER LENGTH	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
HEAT TREATMENT	T-73 SOLUTION HEAT TREATED OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
GRIP LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
SHANK STYLE	STRAIGHT W/RADIUS CHAMFERED TIP
SURFACE TREATMENT	ANODIZE OR CHROMATE OVERALL
COUNTERSINK ANGLE	99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 3

NASM20426Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS20426DD8-10Reference document

Same NSN cross-reference

Reference document — Secondary reference

NASM5674Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy AN426DD8-10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AN426DD8-10?

AN426DD8-10 is a RIVET,SOLID.

What parts can replace AN426DD8-10?

There are 3 known substitutes for AN426DD8-10: NASM20426, MS20426DD8-10, NASM5674. Substitute compatibility should be verified for your specific system.

What is the NSN for AN426DD8-10?

AN426DD8-10 is cataloged in the U.S. Government catalog under NSN 5320-00-117-7238. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AN426DD8-10 — RIVET,SOLID

Request a Quote — AN426DD8-10