PartsTable
Technical Data Sheet
Download PDF

AN4164-2 — SLEEVE,IGNITION TERMINAL

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

AN4164-2: SLEEVE,IGNITION TERMINAL.

The SLEEVE,IGNITION TERMINAL is a the manufacturer industrial component. Key specifications include length: 0.562 INCHES NOMINAL IN, material: CERAMIC BODY, contact_type: SPRING, inside_diameter: 0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN, outside_diameter: 0.364 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN, special_features: SUPPORTS GRUMMAN A10 AIRCRAFT. This part is cataloged in the U.S.

Government catalog under NSN 2920-00-319-5048, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN4164-2
NSN: 2920-00-319-5048
NIINs: 003195048, 007939660
FSC: 2920 — Engine Electrical System Components, Nonaircraft
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
length0.562 INCHES NOMINAL IN
materialCERAMIC BODY
contact_typeSPRING
inside_diameter0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
outside_diameter0.364 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
special_featuresSUPPORTS GRUMMAN A10 AIRCRAFT
accommodated_wire_size7.0 MILLIMETERS NOMINAL MM
contact_protrusion_length0.234 INCHES NOMINAL IN
NSN2920-00-319-5048
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available SLEEVE,IGNITION TERMINAL TITLE COMPONENT PN AN4164-2 MFR SLEEVE,IGNITION TERMIN
KEY FEATURES
•
CONTACT TYPE: SPRING
•
LENGTH: 0.562 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.364 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
•
INSIDE DIAMETER: 0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
•
ACCOMMODATED WIRE SIZE: 7.0 MILLIMETERS NOMINAL MM
•
MATERIAL: CERAMIC BODY
•
CONTACT PROTRUSION LENGTH: 0.234 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CONTACT TYPESPRING
LENGTH0.562 INCHES NOMINAL IN
OUTSIDE DIAMETER0.364 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
INSIDE DIAMETER0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
ACCOMMODATED WIRE SIZE7.0 MILLIMETERS NOMINAL MM
SPECIAL FEATURESSUPPORTS GRUMMAN A10 AIRCRAFT
MATERIALCERAMIC BODY
CONTACT PROTRUSION LENGTH0.234 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 6
10-52605Reference document
Same NSN cross-reference
Reference document — Secondary reference
2216Reference document
Same NSN cross-reference
Reference document — Secondary reference
10-526C5Reference document
Same NSN cross-reference
Reference document — Secondary reference
PI1166-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
P11166-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
25649Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AN4164-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN4164-2?
AN4164-2 is a SLEEVE,IGNITION TERMINAL.
What parts can replace AN4164-2?
There are 6 known substitutes for AN4164-2: 10-52605, 2216, 10-526C5 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN4164-2?
AN4164-2 is cataloged in the U.S. Government catalog under NSN 2920-00-319-5048. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN4164-2