PartsTable
Technical Data Sheet
Download PDF

AN415-1-7 — PIN,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AN415-1-7: PIN,LOCK.

The PIN,LOCK is a the manufacturer industrial component. Key specifications include end_item_identification: RQ-4A GLOBAL HAWK A. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-194-2464, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN415-1-7
NSN: 5315-00-194-2464
NIINs: 001942464, 016095146
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
end_item_identificationRQ-4A GLOBAL HAWK A
NSN5315-00-194-2464
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN415-1-7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIRE STOCK DIAMETER: 0.078 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: LOCK
•
OPENING WIDTH: 0.375 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423 COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PRONG LENGTH: 6.984 INCHES MINIMUM AND 7.016 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 316 OVERALL
TECHNICAL CHARACTERISTICS
WIRE STOCK DIAMETER0.078 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
STYLE DESIGNATORLOCK
OPENING WIDTH0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423 COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PRONG LENGTH6.984 INCHES MINIMUM AND 7.016 INCHES MAXIMUM IN
MATERIALSTEEL COMP 316 OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
A-A-55487-1-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A-A-55487Reference document
Same NSN cross-reference
Reference document — Secondary reference
70P322-670Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AN415-1-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN415-1-7?
AN415-1-7 is a PIN,LOCK.
What parts can replace AN415-1-7?
There are 3 known substitutes for AN415-1-7: A-A-55487-1-7, A-A-55487, 70P322-670. Substitute compatibility should be verified for your specific system.
What is the NSN for AN415-1-7?
AN415-1-7 is cataloged in the U.S. Government catalog under NSN 5315-00-194-2464. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN415-1-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.