PartsTable
Technical Data Sheet
Download PDF

AN4045-1 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AN4045-1: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include thread_class: 3A A, thread_length: 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN, fastener_length: 0.573 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN, minimum_tensile_strength: 160000 POUNDS PER SQUARE INCH LBS. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-023-7623, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN4045-1
NSN: 5330-00-023-7623
NIINs: 000237623, 003490288
FSC: 5330 — Packing and Gasket Materials
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
thread_class3A A
thread_length0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
fastener_length0.573 INCHES MINIMUM AND 0.603 INCHES MAXIMUM IN
minimum_tensile_strength160000 POUNDS PER SQUARE INCH LBS
NSN5330-00-023-7623
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN4045-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.014 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3232 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.562 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.281 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.014 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3232 ASSN STD ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH2.438 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.438 INCHES NOMINAL IN
APERTURE DIAMETER1.562 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.281 INCHES NOMINAL IN
MATERIALASBESTOS AND RUBBER SYNTHETIC OVERALL
HOLE DIAMETER0.188 INCHES MINIMUM AND 0.281 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 7
190144Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3010456Reference document
Same NSN cross-reference
Reference document — Secondary reference
53300237623Reference document
Same NSN cross-reference
Reference document — Informative reference only
5330000237623Reference document
Same NSN cross-reference
Reference document — Informative reference only
AS100001Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS9134-01Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
HAZMAT per U.S. Government catalogNo demilitarization required
Ready to buy AN4045-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN4045-1?
AN4045-1 is a GASKET.
What parts can replace AN4045-1?
There are 7 known substitutes for AN4045-1: 190144, 3010456, 53300237623 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN4045-1?
AN4045-1 is cataloged in the U.S. Government catalog under NSN 5330-00-023-7623. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN4045-1