PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN385-30-5
AN385-30-5 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, first_end_style: OVAL, first_end_location: BOTH ENDS, pin_overall_length: 0.605 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, pin_size_designation: 3/0, first_end_outer_radius: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-721-7255, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN385-30-5
NSN: 5315-00-721-7255
FSC: 5315
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleOVAL
first_end_locationBOTH ENDS
pin_overall_length0.605 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
pin_size_designation3/0
first_end_outer_radius0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-721-7255
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN385-30-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END LOCATION: BOTH ENDS
•
MATERIAL: STEEL OVERALL
•
PIN SIZE DESIGNATION: 3/0
•
PIN OVERALL LENGTH: 0.605 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
FIRST END OUTER RADIUS: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
FIRST END STYLE: OVAL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END LOCATIONBOTH ENDS
MATERIALSTEEL OVERALL
PIN SIZE DESIGNATION3/0
PIN OVERALL LENGTH0.605 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
FIRST END OUTER RADIUS0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
FIRST END STYLEOVAL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
19167Interchangeable
interchangeable cross-reference
interchangeable
46X1VInterchangeable
interchangeable cross-reference
interchangeable
54-280Interchangeable
interchangeable cross-reference
interchangeable
SOLU-CORTEFInterchangeable
interchangeable cross-reference
interchangeable
NDC00009-0016-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN385-30-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN385-30-5?
AN385-30-5 is a PIN,TAPERED,PLAIN.
What parts can replace AN385-30-5?
There are 5 known substitutes for AN385-30-5: 19167, 46X1V, 54-280 and 2 more. Substitute compatibility should be verified for your specific system.
Is AN385-30-5 still available?
AN385-30-5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN385-30-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026