PartsTable
Technical Data Sheet
Download PDF

AN38 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AN38: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: ROUND, nut_diameter: 9.4688 INCHES NOMINAL IN, thread_class: 2B, nut_thickness: 1.125 INCHES NOMINAL IN, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-185-6457, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN38
NSN: 5310-00-185-6457
NIINs: 001856457, 012512846
FSC: 5310 — Nuts and Washers
CAGE: 43766 — SKF INDUSTRIES INC NICE BEARING PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleROUND
nut_diameter9.4688 INCHES NOMINAL IN
thread_class2B
nut_thickness1.125 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
drive_point_depth0.312 INCHES NOMINAL IN
drive_point_width0.750 INCHES NOMINAL IN
nominal_thread_size7.312 INCHES IN
drive_point_quantity4
thread_pitch_diameters+7.3908 TO 7.3999 INCHES IN
NSN5310-00-185-6457
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN38 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD PITCH DIAMETERS: +7.3908 TO 7.3999 INCHES IN
•
DRIVE POINT WIDTH: 0.750 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 7.312 INCHES IN
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY NUT THICKNESS,DRIVE POINT WIDTH AND SMALL END DIAMETER
•
NUT DIAMETER: 9.4688 INCHES NOMINAL IN
•
DRIVE POINT DEPTH: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD PITCH DIAMETERS+7.3908 TO 7.3999 INCHES IN
DRIVE POINT WIDTH0.750 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE7.312 INCHES IN
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY NUT THICKNESS,DRIVE POINT WIDTH AND SMALL END DIAMETER
NUT DIAMETER9.4688 INCHES NOMINAL IN
DRIVE POINT DEPTH0.312 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 CLASS AND 38 SIZE
NUT THICKNESS1.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
MILN21337Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy AN38?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN38?
AN38 is a NUT,PLAIN,ROUND.
What parts can replace AN38?
There is 1 known substitute for AN38: MILN21337. Substitute compatibility should be verified for your specific system.
What is the NSN for AN38?
AN38 is cataloged in the U.S. Government catalog under NSN 5310-00-185-6457. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN38