PartsTable
Technical Data Sheet
Download PDF

AN373F1032 — NUT,SELF-LOCKING,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AN373F1032: NUT,SELF-LOCKING,PLATE.

The NUT,SELF-LOCKING,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: PLATE, nut_height: 0.406 INCHES NOMINAL IN, nut_length: 0.969 INCHES NOMINAL IN, plate_width: 0.453 INCHES NOMINAL IN, temp_rating: 250.0 FAHRENHEIT NOMINAL DEGF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-272-7006, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN373F1032
NSN: 5310-00-272-7006
FSC: 5310 — Nuts and Washers
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_stylePLATE
nut_height0.406 INCHES NOMINAL IN
nut_length0.969 INCHES NOMINAL IN
plate_width0.453 INCHES NOMINAL IN
temp_rating250.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNF
locking_featurePREVAILING TORQUE ALL METAL DESIGN OR PREVAILING TORQUE WITH NONMETALLIC INSERT
plate_thickness0.075 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL NUT
NSN5310-00-272-7006
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN373F1032 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.075 INCHES NOMINAL IN
•
NUT LENGTH: 0.969 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
PLATE WIDTH: 0.453 INCHES NOMINAL IN
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MOUNTING HOLE DIAMETER: 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.075 INCHES NOMINAL IN
NUT LENGTH0.969 INCHES NOMINAL IN
THREAD SERIESUNF
PLATE WIDTH0.453 INCHES NOMINAL IN
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MOUNTING HOLE DIAMETER0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
COUNTERBORE DIAMETER0.406 INCHES MINIMUM AND 0.416 INCHES MAXIMUM NUT IN
SUBSTITUTES & CROSS-REFERENCES 3
25427850-04Reference document
Same NSN cross-reference
Reference document — Secondary reference
MILN25027TYPE250Reference document
Same NSN cross-reference
Reference document — Identification reference
ANN5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy AN373F1032?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN373F1032?
AN373F1032 is a NUT,SELF-LOCKING,PLATE.
What parts can replace AN373F1032?
There are 3 known substitutes for AN373F1032: 25427850-04, MILN25027TYPE250, ANN5. Substitute compatibility should be verified for your specific system.
What is the NSN for AN373F1032?
AN373F1032 is cataloged in the U.S. Government catalog under NSN 5310-00-272-7006. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN373F1032