PartsTable
Technical Data Sheet
Download PDF

AN345B8 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AN345B8: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: HEXAGON, nut_height: 0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-167-1367, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN345B8
NSN: 5310-00-167-1367
FSC: 5310 — Nuts and Washers
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleHEXAGON
nut_height0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
countersink_angle110.0 DEGREES NOMINAL NUT
width_across_flats0.332 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
nominal_thread_size0.164 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch36
NSN5310-00-167-1367
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN345B8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.332 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NUT HEIGHT: 0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 110.0 DEGREES NOMINAL NUT
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.332 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT HEIGHT0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
COUNTERSINK ANGLE110.0 DEGREES NOMINAL NUT
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH36
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
287278Reference document
Same NSN cross-reference
Reference document — Secondary reference
JH361B8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy AN345B8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN345B8?
AN345B8 is a NUT,PLAIN,HEXAGON.
What parts can replace AN345B8?
There are 2 known substitutes for AN345B8: 287278, JH361B8. Substitute compatibility should be verified for your specific system.
What is the NSN for AN345B8?
AN345B8 is cataloged in the U.S. Government catalog under NSN 5310-00-167-1367. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN345B8