PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN316-14
AN316-14 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,JAM EXTENSION is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_width: 1.236 INCHES MINIMUM AND 1.315 INCHES MAXIMUM IN, overall_height: 0.438 INCHES NOMINAL IN, overall_diameter: 1.516 INCHES NOMINAL IN, surface_treatment: CADMIUM, specification/standard_data: 98750-NAS-316 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-486-9007, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN316-14
NSN: 5310-01-486-9007
FSC: 5310
CAGE: 98750 — SAN ANTONIO AIR LOGISTICS CENTER (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_width1.236 INCHES MINIMUM AND 1.315 INCHES MAXIMUM IN
overall_height0.438 INCHES NOMINAL IN
overall_diameter1.516 INCHES NOMINAL IN
surface_treatmentCADMIUM
specification/standard_data98750-NAS-316 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
thread_size_and_series/type_designator0.875 UNF
general_characteristics_item_description14 THREADS PER INCH;3 B THREAD CLASS
NSN5310-01-486-9007
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN316-14 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: 14 THREADS PER INCH;3 B THREAD CLASS
•
MATERIAL: STEEL CORROSION RESISTING
•
OVERALL DIAMETER: 1.516 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 98750-NAS-316 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 0.875 UNF
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.236 INCHES MINIMUM AND 1.315 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM
GENERAL CHARACTERISTICS ITEM DESCRIPTION14 THREADS PER INCH;3 B THREAD CLASS
MATERIALSTEEL CORROSION RESISTING
OVERALL HEIGHT0.438 INCHES NOMINAL IN
OVERALL DIAMETER1.516 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA98750-NAS-316 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD SIZE AND SERIES/TYPE DESIGNATOR0.875 UNF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
938.02.27.106Interchangeable
interchangeable cross-reference
interchangeable
AN316-6RInterchangeable
interchangeable cross-reference
interchangeable
911C208-14Interchangeable
interchangeable cross-reference
interchangeable
AN316-5RInterchangeable
interchangeable cross-reference
interchangeable
84000398Interchangeable
interchangeable cross-reference
interchangeable
938.02.27.104Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN316-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN316-14?
AN316-14 is a NUT,JAM EXTENSION.
What parts can replace AN316-14?
There are 7 known substitutes for AN316-14: 938.02.27.106, AN316-6R, 911C208-14 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN316-14?
AN316-14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-486-9007. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN316-14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026