PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN315-5R
AN315-5R ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.234 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-1345, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN315-5R
NSN: 5310-00-167-1345
FSC: 5310
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.234 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_across_flats0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
nominal_thread_size0.312 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch24
departure_from_cited_designatorAS MODIFIED BY SURFACE TREATMENT
NSN5310-00-167-1345
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN315-5R · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT HEIGHT: 0.234 INCHES NOMINAL IN
•
WIDTH ACROSS FLATS: 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
THREAD SERIES: UNF
•
THREAD QUANTITY PER INCH: 24
•
THREAD CLASS: 3B
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS (FLIS)
NUT HEIGHT0.234 INCHES NOMINAL IN
WIDTH ACROSS FLATS0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
NOMINAL THREAD SIZE0.312 INCHES IN
END ITEM IDENTIFICATIONHIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
THREAD SERIESUNF
THREAD QUANTITY PER INCH24
THREAD CLASS3B
NUT STYLEHEXAGON
BEARING SURFACE TYPEWASHER FACED
COUNTERSINK ANGLE110.0 DEGREES NOMINAL NUT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
AN315-5RInterchangeable
interchangeable cross-reference
interchangeable
404 226Interchangeable
interchangeable cross-reference
interchangeable
8161462Interchangeable
Same NIIN cross-reference
interchangeable
F22R315-524Interchangeable
Same NIIN cross-reference
interchangeable
NAS502-5-4AInterchangeable
Same NIIN cross-reference
interchangeable
A143866Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN315-5R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN315-5R?
AN315-5R is a NUT,PLAIN,HEXAGON.
What parts can replace AN315-5R?
There are 8 known substitutes for AN315-5R: AN315-5R, 404 226, 8161462 and 5 more. Substitute compatibility should be verified for your specific system.
Is AN315-5R still available?
AN315-5R is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN315-5R

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026