PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN3022-10
AN3022-10 ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The SWITCH,TOGGLE is a the manufacturer industrial component. Key specifications include body_style: HOLE MOUNT, body_width: 0.766 INCHES MAXIMUM IN, body_length: 1.453 INCHES MAXIMUM IN, actuator_style: ROUND, inclosure_type: FULLY INCLOSED, actuator_height: 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5930-00-636-0499, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN3022-10
NSN: 5930-00-636-0499
FSC: 5930
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
body_styleHOLE MOUNT
body_width0.766 INCHES MAXIMUM IN
body_length1.453 INCHES MAXIMUM IN
actuator_styleROUND
inclosure_typeFULLY INCLOSED
actuator_height0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN
actuator_diameter0.237 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
features_providedACTUATOR SEAL
terminal_type_and_quantity2 SCREW
nonpile-up_contact_arrangement1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION SINGLE SWITCH UNIT
maximum_voltage_rating_in_volts115.0 AC AND 28.0 DC
actuator_position-action_relationshipUP POSITION MAINTAINED AND DOWN POSITION MOMENTARY
NSN5930-00-636-0499
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available SWITCH,TOGGLE TITLE COMPONENT PN AN3022-10 MFR SWITCH,TOGGLE
KEY FEATURES
•
FEATURES PROVIDED: ACTUATOR SEAL
•
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION: SUBMERSIBLE
•
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE: 20.000 AMPERES RESISTIVE DC AND 10.000 AMPERES INDUCTIVE DC AND 5.000 AMPERES LAMP DC AND 15.000 AMPERES RESISTIVE AC AND 7.000 AMPERES INDUCTIVE AC AND 2.000 AMPERES LAMP AC
•
TERMINAL TYPE AND QUANTITY: 2 SCREW
•
TEST DATA DOCUMENT: 81349-MIL-S-3950 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
BODY STYLE: HOLE MOUNT
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 1.796 INCHES MINIMUM AND 1.828 INCHES MAXIMUM IN
•
MAXIMUM VOLTAGE RATING IN VOLTS: 115.0 AC AND 28.0 DC
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDACTUATOR SEAL
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONSUBMERSIBLE
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE20.000 AMPERES RESISTIVE DC AND 10.000 AMPERES INDUCTIVE DC AND 5.000 AMPERES LAMP DC AND 15.000 AMPERES RESISTIVE AC AND 7.000 AMPERES INDUCTIVE AC AND 2.000 AMPERES LAMP AC
TERMINAL TYPE AND QUANTITY2 SCREW
TEST DATA DOCUMENT81349-MIL-S-3950 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BODY STYLEHOLE MOUNT
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.796 INCHES MINIMUM AND 1.828 INCHES MAXIMUM IN
MAXIMUM VOLTAGE RATING IN VOLTS115.0 AC AND 28.0 DC
INCLOSURE TYPEFULLY INCLOSED
ACTUATOR DIAMETER0.237 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
507-3Interchangeable
interchangeable cross-reference
interchangeable
33845Interchangeable
interchangeable cross-reference
interchangeable
814-10Interchangeable
interchangeable cross-reference
interchangeable
TAF-6030Interchangeable
interchangeable cross-reference
interchangeable
02-03-01-0001Interchangeable
interchangeable cross-reference
interchangeable
81-0410-01-301Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN3022-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN3022-10?
AN3022-10 is a SWITCH,TOGGLE.
What parts can replace AN3022-10?
There are 9 known substitutes for AN3022-10: 507-3, 33845, 814-10 and 6 more. Substitute compatibility should be verified for your specific system.
Is AN3022-10 still available?
AN3022-10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN3022-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026