PartsTable
Technical Data Sheet
Download PDF

AN201K12AANG25 — BEARING,BALL,AIRFRAME

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

AN201K12AANG25: BEARING,BALL,AIRFRAME.

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.7500 INCHES NOMINAL IN, load_direction: RADIAL, inner_ring_width: 0.4370 INCHES NOMINAL IN, outer_ring_width: 0.3750 INCHES NOMINAL IN, style_designator: SINGLE ROW INNER RING EXTENDED BOTH SIDES. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-142-4294, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN201K12AANG25
NSN: 3110-00-142-4294
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 80059 — JOINT AIRCRAFT COMMITTEE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.7500 INCHES NOMINAL IN
load_directionRADIAL
shield_quantity2
inner_ring_width0.4370 INCHES NOMINAL IN
outer_ring_width0.3750 INCHES NOMINAL IN
style_designatorSINGLE ROW INNER RING EXTENDED BOTH SIDES
surface_treatmentCADMIUM OVERALL
overall_outside_diameter1.6250 INCHES NOMINAL IN
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-142-4294
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: AN201K12AANG25 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.3750 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: SINGLE ROW INNER RING EXTENDED BOTH SIDES
•
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH0.3750 INCHES NOMINAL IN
SHIELD QUANTITY2
STYLE DESIGNATORSINGLE ROW INNER RING EXTENDED BOTH SIDES
OVERALL OUTSIDE DIAMETER1.6250 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
SURFACE TREATMENTCADMIUM OVERALL
BORE DIAMETER0.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
INNER RING WIDTH0.4370 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
K12AReference document
Same NSN cross-reference
Reference document — Secondary reference
FC90-41Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
A14586Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — mutilation
Ready to buy AN201K12AANG25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN201K12AANG25?
AN201K12AANG25 is a BEARING,BALL,AIRFRAME.
What parts can replace AN201K12AANG25?
There are 3 known substitutes for AN201K12AANG25: K12A, FC90-41, A14586. Substitute compatibility should be verified for your specific system.
What is the NSN for AN201K12AANG25?
AN201K12AANG25 is cataloged in the U.S. Government catalog under NSN 3110-00-142-4294. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN201K12AANG25

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.