PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN200KS3L
AN200KS3L ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, bore_diameter: 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, load_direction: RADIAL, inner_ring_width: 0.2400 INCHES MINIMUM AND 0.2450 INCHES MAXIMUM IN, outer_ring_width: 0.1980 INCHES MINIMUM AND 0.2030 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-140-9586, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN200KS3L
NSN: 3110-00-140-9586
FSC: 3110
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OUTER RING
bore_diameter0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
alignment_typeSELF-ALIGNING
load_directionRADIAL
shield_quantity2
inner_ring_width0.2400 INCHES MINIMUM AND 0.2450 INCHES MAXIMUM IN
outer_ring_width0.1980 INCHES MINIMUM AND 0.2030 INCHES MAXIMUM IN
style_designatorSINGLE ROW SELF ALIGNING SINGLE ROW INNER RING EXTENDED BOTH SIDES
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
self-alignment_locationINTERNAL
overall_outside_diameter0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
material_document_and_classificationQQ-P-416,TY 1,CL 2 FED SPEC SINGLE MATERIAL RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
NSN3110-00-140-9586
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: AN200KS3L · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER RING WIDTH: 0.2400 INCHES MINIMUM AND 0.2450 INCHES MAXIMUM IN
•
SELF-ALIGNMENT LOCATION: INTERNAL
•
ALIGNMENT TYPE: SELF-ALIGNING
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
OUTER RING WIDTH: 0.1980 INCHES MINIMUM AND 0.2030 INCHES MAXIMUM IN
•
LOAD DIRECTION: RADIAL
•
SHIELD QUANTITY: 2
•
BORE DIAMETER: 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
INNER RING WIDTH0.2400 INCHES MINIMUM AND 0.2450 INCHES MAXIMUM IN
SELF-ALIGNMENT LOCATIONINTERNAL
ALIGNMENT TYPESELF-ALIGNING
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
OUTER RING WIDTH0.1980 INCHES MINIMUM AND 0.2030 INCHES MAXIMUM IN
LOAD DIRECTIONRADIAL
SHIELD QUANTITY2
BORE DIAMETER0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 2 FED SPEC SINGLE MATERIAL RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
KSP10FS464Interchangeable
interchangeable cross-reference
interchangeable
AS27645Interchangeable
interchangeable cross-reference
interchangeable
SAE AS27645Interchangeable
interchangeable cross-reference
interchangeable
MS27645-3AInterchangeable
interchangeable cross-reference
interchangeable
KSP3LFS464Interchangeable
interchangeable cross-reference
interchangeable
KSP3LInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN200KS3L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN200KS3L?
AN200KS3L is a BEARING,BALL,AIRFRAME.
What parts can replace AN200KS3L?
There are 27 known substitutes for AN200KS3L: KSP10FS464, AS27645, SAE AS27645 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN200KS3L?
AN200KS3L is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-140-9586. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN200KS3L

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026