PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN200K8ANG25
AN200K8ANG25 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING SHIELD, bore_diameter: 0.5000 INCHES NOMINAL IN, load_direction: RADIAL, inner_ring_width: 0.6200 INCHES NOMINAL IN, outer_ring_width: 0.5000 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-261-3778, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN200K8ANG25
NSN: 3110-00-261-3778
FSC: 3110
CAGE: 80059 — JOINT AIRCRAFT COMMITTEE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING SHIELD
bore_diameter0.5000 INCHES NOMINAL IN
load_directionRADIAL
shield_quantity2
inner_ring_width0.6200 INCHES NOMINAL IN
outer_ring_width0.5000 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
overall_outside_diameter1.6875 INCHES NOMINAL IN
lubrication_material_document_and_classificationMIL-G-3278,LOW TEMP MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-261-3778
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: AN200K8ANG25 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
INNER RING WIDTH: 0.6200 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
OUTER RING WIDTH: 0.5000 INCHES NOMINAL IN
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-3278,LOW TEMP MIL SPEC SINGLE MATERIAL RESPONSE
•
SURFACE TREATMENT: CADMIUM OVERALL
•
BORE DIAMETER: 0.5000 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 1.6875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
INNER RING WIDTH0.6200 INCHES NOMINAL IN
SHIELD QUANTITY2
OUTER RING WIDTH0.5000 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3278,LOW TEMP MIL SPEC SINGLE MATERIAL RESPONSE
SURFACE TREATMENTCADMIUM OVERALL
BORE DIAMETER0.5000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.6875 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING SHIELD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
008569Interchangeable
interchangeable cross-reference
interchangeable
MS14305-4UInterchangeable
interchangeable cross-reference
interchangeable
1215-1-2Interchangeable
interchangeable cross-reference
interchangeable
K8Interchangeable
interchangeable cross-reference
interchangeable
K-1008Interchangeable
interchangeable cross-reference
interchangeable
171945Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN200K8ANG25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN200K8ANG25?
AN200K8ANG25 is a BEARING,BALL,AIRFRAME.
What parts can replace AN200K8ANG25?
There are 9 known substitutes for AN200K8ANG25: 008569, MS14305-4U, 1215-1-2 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN200K8ANG25?
AN200K8ANG25 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-261-3778. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN200K8ANG25

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026