PartsTable
Technical Data Sheet
Download PDF

AN-6227-22 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AN-6227-22: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, outside_diameter: 1.449 INCHES NOMINAL IN, center_hole_diameter: 1.165 INCHES MINIMUM AND 1.177 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-198-6179, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN-6227-22
NSN: 5330-00-198-6179
NIINs: 001986179, 005797914
FSC: 5330 — Packing and Gasket Materials
CAGE: 06644 — CHICAGO GASKET CO (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
outside_diameter1.449 INCHES NOMINAL IN
center_hole_diameter1.165 INCHES MINIMUM AND 1.177 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5330-00-198-6179
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN-6227-22 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 164 MAXIMUM
•
PERIPHERAL DIAMETER: 1.429 INCHES MINIMUM AND 1.469 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.165 INCHES MINIMUM AND 1.177 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
ELONGATION PERCENTAGE164 MAXIMUM
PERIPHERAL DIAMETER1.429 INCHES MINIMUM AND 1.469 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.165 INCHES MINIMUM AND 1.177 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 9
34566C6Reference document
Same NSN cross-reference
Reference document — Secondary reference
3253398Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN6227B22Reference document
Same NSN cross-reference
Reference document — Secondary reference
6859Reference document
Same NSN cross-reference
Reference document — Secondary reference
82-20217-01Reference document
Same NSN cross-reference
Reference document — Secondary reference
775-50Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy AN-6227-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN-6227-22?
AN-6227-22 is a O-RING.
What parts can replace AN-6227-22?
There are 9 known substitutes for AN-6227-22: 34566C6, 3253398, AN6227B22 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN-6227-22?
AN-6227-22 is cataloged in the U.S. Government catalog under NSN 5330-00-198-6179. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN-6227-22