PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN-24
AN-24 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include phase: SINGLE, current_type: AC, overall_width: 1.880 INCHES NOMINAL IN, terminal_type: PIN CONTACTS, overall_length: 4.750 INCHES NOMINAL IN, voltage_rating: 0.030 VOLTS NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-185-6340, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN-24
NSN: 5310-00-185-6340
FSC: 5310
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
phaseSINGLE
current_typeAC
overall_width1.880 INCHES NOMINAL IN
terminal_typePIN CONTACTS
overall_length4.750 INCHES NOMINAL IN
voltage_rating0.030 VOLTS NOMINAL
mounting_methodTHREADED MALE CONNECTION
actuation_methodPIVOTED VANE AND MAGNETIC
measurement_range+1900.0 TO 57000.0 POUNDS PER HOUR LBS
overall_thickness3.690 INCHES NOMINAL IN
terminal_quantity4
mechanical_connection_size1-1/2 IN. OD IN
NSN5310-00-185-6340
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN-24 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD PITCH DIAMETERS: +4.6619 TO 4.6702 INCHES IN
•
HARDNESS RATING: 66.0 ROCKWELL B MINIMUM AND 92.0 ROCKWELL B MAXIMUM
•
THREAD SERIES: UNS
•
THREAD QUANTITY PER INCH: 12
•
NOMINAL THREAD SIZE: 4.716 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
NUT DIAMETER: 6.125 INCHES NOMINAL IN
•
NUT THICKNESS: 0.8125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD PITCH DIAMETERS+4.6619 TO 4.6702 INCHES IN
HARDNESS RATING66.0 ROCKWELL B MINIMUM AND 92.0 ROCKWELL B MAXIMUM
THREAD SERIESUNS
THREAD QUANTITY PER INCH12
NOMINAL THREAD SIZE4.716 INCHES IN
THREAD DIRECTIONRIGHT-HAND
NUT DIAMETER6.125 INCHES NOMINAL IN
NUT THICKNESS0.8125 INCHES NOMINAL IN
DRIVE POINT WIDTH0.500 INCHES NOMINAL IN
DRIVE POINT DEPTH0.1875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
401047Interchangeable
interchangeable cross-reference
interchangeable
1396Interchangeable
interchangeable cross-reference
interchangeable
5710Interchangeable
interchangeable cross-reference
interchangeable
AN24Interchangeable
interchangeable cross-reference
interchangeable
24Interchangeable
interchangeable cross-reference
interchangeable
V1802NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN-24?
AN-24 is a NUT,PLAIN,ROUND.
What parts can replace AN-24?
There are 18 known substitutes for AN-24: 401047, 1396, 5710 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN-24?
AN-24 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-185-6340. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN-24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026