PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AMVF3DDFS160
AMVF3DDFS160 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C BALL, bore_shape: STRAIGHT, flange_width: 0.0400 INCHES MINIMUM AND 0.0440 INCHES MAXIMUM IN, bore_diameter: 0.1875 INCHES MINIMUM AND 0.1877 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-966-9734, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AMVF3DDFS160
NSN: 3110-00-966-9734
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP 440C BALL
bore_shapeSTRAIGHT
flange_width0.0400 INCHES MINIMUM AND 0.0440 INCHES MAXIMUM IN
bore_diameter0.1875 INCHES MINIMUM AND 0.1877 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
inner_ring_width0.2490 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN
outer_ring_taper0.0800 PER FOOT IN INCHES NOMINAL
outer_ring_width0.2220 INCHES MINIMUM AND 0.2260 INCHES MAXIMUM IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL IN
NSN3110-00-966-9734
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: AMVF3DDFS160 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH: 0.0400 INCHES MINIMUM AND 0.0440 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
OUTER RING WIDTH: 0.2220 INCHES MINIMUM AND 0.2260 INCHES MAXIMUM IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BORE SHAPE: STRAIGHT
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
LOAD DIRECTION: RADIAL
•
CALIBRATION DESIGNATOR: C
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE WIDTH0.0400 INCHES MINIMUM AND 0.0440 INCHES MAXIMUM IN
SURFACE FINISHGROUND
OUTER RING WIDTH0.2220 INCHES MINIMUM AND 0.2260 INCHES MAXIMUM IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
LOAD DIRECTIONRADIAL
CALIBRATION DESIGNATORC
STANDARD TOLERANCE DESIGNATIONABEC NO.5
SHIELD QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
24730Interchangeable
interchangeable cross-reference
interchangeable
ST7M192-2Interchangeable
interchangeable cross-reference
interchangeable
24730A001Interchangeable
interchangeable cross-reference
interchangeable
66013Interchangeable
interchangeable cross-reference
interchangeable
26040Interchangeable
interchangeable cross-reference
interchangeable
D50-0013 ITEM 3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AMVF3DDFS160?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AMVF3DDFS160?
AMVF3DDFS160 is a BEARING,BALL,ANNULAR.
What parts can replace AMVF3DDFS160?
There are 12 known substitutes for AMVF3DDFS160: 24730, ST7M192-2, 24730A001 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AMVF3DDFS160?
AMVF3DDFS160 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-966-9734. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AMVF3DDFS160

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026