AMS10133-1601 — SUPPORT,STRUCTURAL COMPONENT,AIR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

AMS10133-1601: SUPPORT,STRUCTURAL COMPONENT,AIR.

SUPPORT,STRUCTURAL COMPONENT,AIR. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 2024, overall_width: 1.750 INCHES NOMINAL IN, heat_treatment: T-3511 SOLUTION HEAT TREATED, overall_height: 1.750 INCHES NOMINAL IN, first_tip_style: RIGHT QUARTER RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 9540-00-145-8404, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AMS10133-1601

NSN: 9540-00-145-8404
NIINs: 001458404, 010718852
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

length	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
material	ALUMINUM ALLOY 2024
overall_width	1.750 INCHES NOMINAL IN
heat_treatment	T-3511 SOLUTION HEAT TREATED
overall_height	1.750 INCHES NOMINAL IN
first_tip_style	RIGHT QUARTER RADIUS
first_tip_radius	0.094 INCHES NOMINAL IN
second_tip_style	UPPER RADIUS
basic_shape_style	ANGLE
left_inside_angle	90.0 DEGREES NOMINAL
second_tip_radius	0.094 INCHES NOMINAL IN
fabrication_method	EXTRUDED
NSN	9540-00-145-8404

COMPONENT DIAGRAM

KEY FEATURES

•

BASE FLANGE THICKNESS: 0.094 INCHES NOMINAL IN

•

HEAT TREATMENT: T-6 SOLUTION HEAT TREATED OR T-6511 SOLUTION HEAT TREATED

•

FIRST TIP RADIUS: 0.094 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE

•

LEFT SIDE FLANGE THICKNESS: 0.094 INCHES NOMINAL IN

•

SECOND TIP RADIUS: 0.094 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	1.750 INCHES NOMINAL IN
BASE FLANGE THICKNESS	0.094 INCHES NOMINAL IN
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED OR T-6511 SOLUTION HEAT TREATED
FIRST TIP RADIUS	0.094 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL WIDTH	1.750 INCHES NOMINAL IN
LEFT SIDE FLANGE THICKNESS	0.094 INCHES NOMINAL IN
SECOND TIP RADIUS	0.094 INCHES NOMINAL IN
BASIC SHAPE STYLE	ANGLE
WEIGHT PER UNIT MEASURE	0.400 POUNDS PER LINEAR FOOT LBS

SUBSTITUTES & CROSS-REFERENCES 7

AND10133-1601/ASTM B221-T6511Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

AMS4154Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

ASTM B221Reference document

Same NSN cross-reference

Reference document — Secondary reference

AMS-QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

2-1340Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AMS10133-1601?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AMS10133-1601?

AMS10133-1601 is a SUPPORT,STRUCTURAL COMPONENT,AIR.

What parts can replace AMS10133-1601?

There are 7 known substitutes for AMS10133-1601: AND10133-1601/ASTM B221-T6511, AMS4154, QQ-A-200/11 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AMS10133-1601?

AMS10133-1601 is cataloged in the U.S. Government catalog under NSN 9540-00-145-8404. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AMS10133-1601 — SUPPORT,STRUCTURAL COMPONENT,AIR

Request a Quote — AMS10133-1601