AMS-R-83485 M83485/1-130 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AMS-R-83485 M83485/1-130: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 1.597 INCHES MINIMUM AND 1.627 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, end_item_identification: ENGINE,AIRCRAFT F100-PW-229. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-501-4302, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AMS-R-83485 M83485/1-130

NSN: 5331-01-501-4302
FSC: 5331 — O-ring
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
temp_rating	-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter	1.597 INCHES MINIMUM AND 1.627 INCHES MAXIMUM IN
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
end_item_identification	ENGINE,AIRCRAFT F100-PW-229
material_document_and_classification	AMS-R-83485 ASSN STD SINGLE MATERIAL RESPONSE
NSN	5331-01-501-4302

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS-R-83485 ASSN STD SINGLE MATERIAL RESPONSE

•

CENTER HOLE DIAMETER: 1.597 INCHES MINIMUM AND 1.627 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-R-83485 ASSN STD SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER	1.597 INCHES MINIMUM AND 1.627 INCHES MAXIMUM IN
END ITEM IDENTIFICATION	ENGINE,AIRCRAFT F100-PW-229
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 5

5331PL0658581Reference document

Same NSN cross-reference

Reference document — Informative reference only

M83485/1-130Reference document

Same NSN cross-reference

Reference document — Secondary reference

ST1946-130Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

2-130 V0835-75Reference document

Same NSN cross-reference

Reference document — Secondary reference

V0835 2-130Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AMS-R-83485 M83485/1-130?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AMS-R-83485 M83485/1-130?

AMS-R-83485 M83485/1-130 is a O-RING.

What parts can replace AMS-R-83485 M83485/1-130?

There are 5 known substitutes for AMS-R-83485 M83485/1-130: 5331PL0658581, M83485/1-130, ST1946-130 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AMS-R-83485 M83485/1-130?

AMS-R-83485 M83485/1-130 is cataloged in the U.S. Government catalog under NSN 5331-01-501-4302. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AMS-R-83485 M83485/1-130 — O-RING

Request a Quote — AMS-R-83485 M83485/1-130