PartsTable
Technical Data Sheet
PartsTable / O-RING / AMS-R-7362, TY 1
AMS-R-7362, TY 1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The AMS-R-7362, TY 1 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-952-7400, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AMS-R-7362, TY 1
NSN: 5331-00-952-7400
FSC: 5331 — O-RING
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
Part NumberAMS-R-7362, TY 1
NSN5331-00-952-7400
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AMS-R-7362, TY 1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 2.604 INCHES MINIMUM AND 2.624 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 250 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 2.754 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER2.604 INCHES MINIMUM AND 2.624 INCHES MAXIMUM IN
ELONGATION PERCENTAGE250 MAXIMUM
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER2.754 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
5-137-47-071Interchangeable
interchangeable cross-reference
interchangeable
AMS-R-7362 TY 1Interchangeable
interchangeable cross-reference
interchangeable
AS568-038Interchangeable
interchangeable cross-reference
interchangeable
AMS-R-6855Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AMS-R-7362, TY 1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AMS-R-7362, TY 1?
AMS-R-7362, TY 1 is a AMS-R-7362, TY 1.
What parts can replace AMS-R-7362, TY 1?
There are 4 known substitutes for AMS-R-7362, TY 1: 5-137-47-071, AMS-R-7362 TY 1, AS568-038 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AMS-R-7362, TY 1?
AMS-R-7362, TY 1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-952-7400. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AMS-R-7362, TY 1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026