PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AMS-R-6855CL4/5GR80BLK
AMS-R-6855CL4/5GR80BLK ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The AMS-R-6855CL4/5GR80BLK is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-062-1248, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AMS-R-6855CL4/5GR80BLK
NSN: 5330-00-062-1248
FSC: 5330
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
Part NumberAMS-R-6855CL4/5GR80BLK
NSN5330-00-062-1248
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AMS-R-6855CL4/5GR80BLK MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 0.313 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6855 CL 4 OR 5 GR 80 MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
APERTURE DIAMETER: 0.168 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.074 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL OVERALL
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER0.313 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855 CL 4 OR 5 GR 80 MIL SPEC ALL MATERIAL RESPONSES OVERALL
APERTURE DIAMETER0.168 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.074 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL OVERALL
STYLE DESIGNATORCIRCULAR
SPECIAL FEATURESBLACK
MATERIALRUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
714360-039Interchangeable
interchangeable cross-reference
interchangeable
600-015 1-4Interchangeable
interchangeable cross-reference
interchangeable
GS570C4AInterchangeable
interchangeable cross-reference
interchangeable
AMS-R-6855Interchangeable
interchangeable cross-reference
interchangeable
10111154Interchangeable
interchangeable cross-reference
interchangeable
5361000813537Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AMS-R-6855CL4/5GR80BLK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AMS-R-6855CL4/5GR80BLK?
AMS-R-6855CL4/5GR80BLK is a AMS-R-6855CL4/5GR80BLK.
What parts can replace AMS-R-6855CL4/5GR80BLK?
There are 20 known substitutes for AMS-R-6855CL4/5GR80BLK: 714360-039, 600-015 1-4, GS570C4A and 17 more. Substitute compatibility should be verified for your specific system.
Is AMS-R-6855CL4/5GR80BLK still available?
AMS-R-6855CL4/5GR80BLK is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AMS-R-6855CL4/5GR80BLK

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026