PartsTable
Technical Data Sheet
Download PDF

AMS-P-5315 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AMS-P-5315: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 5.961 INCHES MINIMUM AND 6.007 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, departure_from_cited_document: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL C, criticality_code_justification: ZZZW. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-067-4117, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AMS-P-5315
NSN: 5331-00-067-4117
NIINs: 000674117, 000805610, 001665992, 002483833, 002483835, 002500236, 002638017, 002651075, 002651095, 002913085, 002915079, 002920577, 002920578, 002920580, 002979986, 002979987, 002979990, 002989956, 002989977, 006413813, 012857206
FSC: 5331 — O-ring
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter5.961 INCHES MINIMUM AND 6.007 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
departure_from_cited_documentMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL C
criticality_code_justificationZZZW
NSN5331-00-067-4117
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AMS-P-5315 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.030 INCHES NOMINAL IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 200 MAXIMUM
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.030 INCHES NOMINAL IN
HARDNESS RATING65.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE200 MAXIMUM
MATERIALRUBBER SYNTHETIC
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
GS13AF9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AMS-P-5315?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AMS-P-5315?
AMS-P-5315 is a O-RING.
What parts can replace AMS-P-5315?
There is 1 known substitute for AMS-P-5315: GS13AF9. Substitute compatibility should be verified for your specific system.
What is the NSN for AMS-P-5315?
AMS-P-5315 is cataloged in the U.S. Government catalog under NSN 5331-00-067-4117. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AMS-P-5315