PartsTable
Technical Data Sheet
Download PDF

AMM9106W1-CR — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

AMM9106W1-CR: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 1.1809 INCHES MINIMUM AND 1.1811 INCHES MAXIMUM IN, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 0.5068 INCHES MINIMUM AND 0.5118 INCHES MAXIMUM IN, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-095-3369, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AMM9106W1-CR
NSN: 3110-01-095-3369
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter1.1809 INCHES MINIMUM AND 1.1811 INCHES MAXIMUM IN
contact_angle25.0 DEGREES MAXIMUM
overall_width0.5068 INCHES MINIMUM AND 0.5118 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
lubrication_materialOIL
overall_outside_diameter2.1652 INCHES MINIMUM AND 2.1654 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO. 7P
NSN3110-01-095-3369
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: AMM9106W1-CR · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
LUBRICATION MATERIAL: OIL
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-79 MIL SPEC SINGLE MATERIAL RESPONSE RETAINER
•
OVERALL OUTSIDE DIAMETER: 2.1652 INCHES MINIMUM AND 2.1654 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
LUBRICATION MATERIALOIL
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-79 MIL SPEC SINGLE MATERIAL RESPONSE RETAINER
OVERALL WIDTH0.5068 INCHES MINIMUM AND 0.5118 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER2.1652 INCHES MINIMUM AND 2.1654 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
CONTACT ANGLE25.0 DEGREES MAXIMUM
LOAD DIRECTIONANGULAR
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 4
2AMM9106WICRAXXXXReference document
Same NSN cross-reference
Reference document — Secondary reference
901821-2CReference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
901821-1CReference document
Same NSN cross-reference
Reference document — Secondary reference
SR106B31CK46Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AMM9106W1-CR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AMM9106W1-CR?
AMM9106W1-CR is a BEARING,BALL,ANNULAR.
What parts can replace AMM9106W1-CR?
There are 4 known substitutes for AMM9106W1-CR: 2AMM9106WICRAXXXX, 901821-2C, 901821-1C and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AMM9106W1-CR?
AMM9106W1-CR is cataloged in the U.S. Government catalog under NSN 3110-01-095-3369. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AMM9106W1-CR