PartsTable
Technical Data Sheet
Download PDF

AM17 — CIRCUIT BREAKER

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

AM17: CIRCUIT BREAKER.

The CIRCUIT BREAKER is a the manufacturer industrial component. Key specifications include material: PLASTIC CASE, body_style: SINGLE POLE TYPE, body_width: 0.750 INCHES NOMINAL IN, body_length: 2.500 INCHES NOMINAL IN, reset_method: MANUAL, storage_type: GENERAL PURPOSE WAREHOUSE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-291-4636, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ AM17
NSN: 5330-00-291-4636
NIINs: 002914636, 007820113
FSC: 5330 — Packing and Gasket Materials
CAGE: 13800 — PARKER-HANNIFIN CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleSINGLE POLE TYPE
body_width0.750 INCHES NOMINAL IN
body_length2.500 INCHES NOMINAL IN
reset_methodMANUAL
storage_typeGENERAL PURPOSE WAREHOUSE
pole_quantity1
fragility_factorMODERATELY RUGGED
outside_diameter5.125 INCHES NOMINAL IN
actuator_functionTRIP-RESET
aperture_diameter4.375 INCHES NOMINAL IN
frequency_in_hertz60.0 SINGLE LOCATION
NSN5330-00-291-4636
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AM17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 5.125 INCHES NOMINAL IN
•
APERTURE DIAMETER: 4.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER5.125 INCHES NOMINAL IN
APERTURE DIAMETER4.375 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
UAW17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
17Reference document
Same NSN cross-reference
Reference document — Secondary reference
HW17Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AM17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AM17?
AM17 is a CIRCUIT BREAKER. It is classified as a MRO (MRO_GENERAL).
What parts can replace AM17?
There are 3 known substitutes for AM17: UAW17, 17, HW17. Substitute compatibility should be verified for your specific system.
What is the NSN for AM17?
AM17 is cataloged in the U.S. Government catalog under NSN 5330-00-291-4636. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AM17