The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include height: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN, material: ALUMINUM ALLOY INNER MEMBER, load_rating: 10.0 POUNDS MAXIMUM LBS, flange_width: 1.735 INCHES MINIMUM AND 1.765 INCHES MAXIMUM IN, flange_length: 1.735 INCHES MINIMUM AND 1.765 INCHES MAXIMUM IN, inside_diameter: 0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-476-0095, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AM006-13
NSN:5340-01-476-0095 FSC:5340 — Hardware, Commercial CAGE:0PJN4 — LORD CORP AEROSPACE PRODUCTS DIV (USA)
SPECIFICATIONS
height
0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
material
ALUMINUM ALLOY INNER MEMBER
load_rating
10.0 POUNDS MAXIMUM LBS
flange_width
1.735 INCHES MINIMUM AND 1.765 INCHES MAXIMUM IN
flange_length
1.735 INCHES MINIMUM AND 1.765 INCHES MAXIMUM IN
inside_diameter
0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
flange_thickness
0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
special_features
AXIAL NAT. FREQ. FN (HZ) 37, DYNAMIC AXIAL SPRING RATE 1405 LBS/IN., DYNAMIC RADIAL SPRING RATE 1277 LBS/IN. LBS
style_designator
ROUND SPRING COMPRESSION FOUR-HOLE FLANGE
flange_mounting_hole_diameter
0.208 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
distance_between_mounting_hole_centers
1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
shortest_distance_between_mounting_hole_centers
1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
NSN
5340-01-476-0095
COMPONENT DIAGRAM
KEY FEATURES
•
FLANGE MOUNTING HOLE DIAMETER: 0.208 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
•
LOAD RATING: 10.0 POUNDS MAXIMUM LBS
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
•
FLANGE THICKNESS: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ROUND SPRING COMPRESSION FOUR-HOLE FLANGE
•
FLANGE LENGTH: 1.735 INCHES MINIMUM AND 1.765 INCHES MAXIMUM IN
•
SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
•
INSIDE DIAMETER: 0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FLANGE MOUNTING HOLE DIAMETER
0.208 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
LOAD RATING
10.0 POUNDS MAXIMUM LBS
DISTANCE BETWEEN MOUNTING HOLE CENTERS
1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
FLANGE THICKNESS
0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
STYLE DESIGNATOR
ROUND SPRING COMPRESSION FOUR-HOLE FLANGE
FLANGE LENGTH
1.735 INCHES MINIMUM AND 1.765 INCHES MAXIMUM IN
SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS
1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
INSIDE DIAMETER
0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
HEIGHT
0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
SPECIAL FEATURES
AXIAL NAT. FREQ. FN (HZ) 37, DYNAMIC AXIAL SPRING RATE 1405 LBS/IN., DYNAMIC RADIAL SPRING RATE 1277 LBS/IN. LBS
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AM006-13?
AM006-13 is a MOUNT,RESILIENT,UTILITY.
What parts can replace AM006-13?
There is 1 known substitute for AM006-13: 1051020. Substitute compatibility should be verified for your specific system.
What is the NSN for AM006-13?
AM006-13 is cataloged in the U.S. Government catalog under NSN 5340-01-476-0095. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.