PartsTable
Technical Data Sheet
Download PDF

AM-1110-3-ALSS — FILLER NECK,LIQUID HOLDING UNIT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AM-1110-3-ALSS: FILLER NECK,LIQUID HOLDING UNIT.

FILLER NECK,LIQUID HOLDING UNIT. Key specifications include material: STEEL CORROSION RESISTING, overall_length: 6.3125 INCHES NOMINAL IN, special_features: 10 MICRON; 3 INCH DEEP BASKET; STANDARD CAP GRIP IN, features_provided: BREATHER VENT AND CAP AND FILLER TUBE, end_item_identification: HYDRAULIC POWER UNIT, part_name_assigned_by_controlling_agency: BREATHER, FILLER. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-729-0183, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AM-1110-3-ALSS
NSN: 5340-01-729-0183
FSC: 5340 — Hardware, Commercial
CAGE: 55524 — FLOW EZY FILTERS INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_length6.3125 INCHES NOMINAL IN
special_features10 MICRON; 3 INCH DEEP BASKET; STANDARD CAP GRIP IN
features_providedBREATHER VENT AND CAP AND FILLER TUBE
end_item_identificationHYDRAULIC POWER UNIT
part_name_assigned_by_controlling_agencyBREATHER, FILLER
NSN5340-01-729-0183
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AM-1110-3-ALSS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATURES PROVIDED: BREATHER VENT AND CAP AND FILLER TUBE
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
OVERALL LENGTH6.3125 INCHES NOMINAL IN
FEATURES PROVIDEDBREATHER VENT AND CAP AND FILLER TUBE
SPECIAL FEATURES10 MICRON; 3 INCH DEEP BASKET; STANDARD CAP GRIP IN
PART NAME ASSIGNED BY CONTROLLING AGENCYBREATHER, FILLER
END ITEM IDENTIFICATIONHYDRAULIC POWER UNIT
MATERIALSTEEL CORROSION RESISTING
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AM-1110-3-ALSS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AM-1110-3-ALSS?
AM-1110-3-ALSS is a FILLER NECK,LIQUID HOLDING UNIT.
What is the NSN for AM-1110-3-ALSS?
AM-1110-3-ALSS is cataloged in the U.S. Government catalog under NSN 5340-01-729-0183. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AM-1110-3-ALSS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.