PartsTable
Technical Data Sheet
Download PDF

AL5601-51 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AL5601-51: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.750 INCHES NOMINAL IN, material: UNABLE TO DECODE, overall_width: 1.750 INCHES NOMINAL IN, overall_length: 3.000 INCHES NOMINAL IN, mounting_facility: UNTHREADED HOLE(S), first_surface_hole_size: 0.203 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-493-9235, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AL5601-51
NSN: 5340-00-493-9235
FSC: 5340 — Hardware, Commercial
CAGE: 19220 — EASTERN CO DIV EBERHARD MANUFACTURING (USA)
SPECIFICATIONS
height0.750 INCHES NOMINAL IN
materialUNABLE TO DECODE
overall_width1.750 INCHES NOMINAL IN
overall_length3.000 INCHES NOMINAL IN
mounting_facilityUNTHREADED HOLE(S)
first_surface_hole_size0.203 INCHES NOMINAL IN
first_surface_hole_quantity4
NSN5340-00-493-9235
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AL5601-51 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST SURFACE HOLE SIZE: 0.203 INCHES NOMINAL IN
•
HEIGHT: 0.750 INCHES NOMINAL IN
•
MOUNTING FACILITY: UNTHREADED HOLE(S)
•
MATERIAL: UNABLE TO DECODE
•
FIRST SURFACE HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS
OVERALL LENGTH3.000 INCHES NOMINAL IN
OVERALL WIDTH1.750 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.203 INCHES NOMINAL IN
HEIGHT0.750 INCHES NOMINAL IN
MOUNTING FACILITYUNTHREADED HOLE(S)
MATERIALUNABLE TO DECODE
FIRST SURFACE HOLE QUANTITY4
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
SMB555598-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
SMB555598Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
AL5601 1/2-51Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AL5601-51?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AL5601-51?
AL5601-51 is a STRIKE,CATCH.
What parts can replace AL5601-51?
There are 3 known substitutes for AL5601-51: SMB555598-2, SMB555598, AL5601 1/2-51. Substitute compatibility should be verified for your specific system.
What is the NSN for AL5601-51?
AL5601-51 is cataloged in the U.S. Government catalog under NSN 5340-00-493-9235. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AL5601-51