PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AL15
AL15 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CAP,IGNITION DISTRIBUTION is a the manufacturer industrial component. Key specifications include material: STEEL, part_name_assigned_by_controlling_agency: CLAMP KITS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2248, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AL15
NSN: 3110-00-198-2248
FSC: 3110
CAGE: 63857 — CIRCOR NAVAL SOLUTIONS LLC DBA WARREN PUMPS (USA)
SPECIFICATIONS
materialSTEEL
special_featuresMILD STEEL, USE WITH A12 ENCLOSURES. KIT PROVIDES REPLACEMENT CLAMPS FOR CLAMP-COVER JUNCTION BOXES AND WALL MOUNT ENCLOSURES. EACH KIT CONTAINS TWO CLAMPS AND ALL MOUNTING HARDWARE.
part_name_assigned_by_controlling_agencyCLAMP KITS
NSN3110-00-198-2248
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: AL15 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OUTER RING
•
BORE DIAMETER: 20.00 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
•
BEARING PRELOAD DESIGNATION: LIGHT
•
STYLE DESIGNATOR: UNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESPAIR OF BEARINGS,ANGULARITY 25 DEG OR LESS
SURFACE FINISHGROUND
MATERIALSTEEL OUTER RING
BORE DIAMETER20.00 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONABEC NO.3
BEARING PRELOAD DESIGNATIONLIGHT
OVERALL WIDTH15.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORUNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
STANDARD TOLERANCE DESIGNATIONABEC NO.3
MATERIALSTEEL INNER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
A9307Interchangeable
interchangeable cross-reference
interchangeable
AL-70Interchangeable
interchangeable cross-reference
interchangeable
AL73Interchangeable
interchangeable cross-reference
interchangeable
AL15Interchangeable
interchangeable cross-reference
interchangeable
H1299-178Interchangeable
Same NIIN cross-reference
interchangeable
QH20304DTL3AInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AL15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AL15?
AL15 is a CAP,IGNITION DISTRIBUTION.
What parts can replace AL15?
There are 10 known substitutes for AL15: A9307, AL-70, AL73 and 7 more. Substitute compatibility should be verified for your specific system.
Is AL15 still available?
AL15 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AL15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026