PartsTable
Technical Data Sheet
Download PDF

AL11M01812 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AL11M01812: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1035 OVERALL, end_radius: 0.500 INCHES NOMINAL IN, fork_depth: 1.375 INCHES NOMINAL IN, thread_class: 3B ROD CONNECTION, hole_diameter: 0.498 INCHES NOMINAL IN, overall_width: 1.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-855-3255, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AL11M01812
NSN: 5340-00-855-3255
FSC: 5340 — Hardware, Commercial
CAGE: Z1DF5 — TRT (AUST) PTY LIMITED (AUS)
SPECIFICATIONS
materialSTEEL COMP 1035 OVERALL
end_radius0.500 INCHES NOMINAL IN
fork_depth1.375 INCHES NOMINAL IN
thread_class3B ROD CONNECTION
hole_diameter0.498 INCHES NOMINAL IN
overall_width1.375 INCHES NOMINAL IN
thread_length0.937 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.937 INCHES NOMINAL IN
fork_span_width0.562 INCHES NOMINAL IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
surface_treatmentCADMIUM OVERALL
NSN5340-00-855-3255
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AL11M01812 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.937 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.562 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.498 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.406 INCHES NOMINAL IN
•
END RADIUS: 0.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.937 INCHES NOMINAL ROD CONNECTION IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.937 INCHES NOMINAL IN
FORK SPAN WIDTH0.562 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.498 INCHES NOMINAL IN
FORK ARM THICKNESS0.406 INCHES NOMINAL IN
END RADIUS0.500 INCHES NOMINAL IN
THREAD LENGTH0.937 INCHES NOMINAL ROD CONNECTION IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH1.375 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
228790Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AL11M01812?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AL11M01812?
AL11M01812 is a CLEVIS,ROD END.
What parts can replace AL11M01812?
There is 1 known substitute for AL11M01812: 228790. Substitute compatibility should be verified for your specific system.
What is the NSN for AL11M01812?
AL11M01812 is cataloged in the U.S. Government catalog under NSN 5340-00-855-3255. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AL11M01812

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.