AL-5ER-0.0511 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

AL-5ER-0.0511: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: ALUMINUM ALLOY HEAT SINK, body_width: 0.335 INCHES NOMINAL0.335 INCHES NOMINAL IN, body_height: 0.321 INCHES NOMINAL0.321 INCHES NOMINAL IN, body_length: 0.600 INCHES NOMINAL0.600 INCHES NOMINAL IN, cubic_measure: 0.058 CUBIC INCHES0.058 CUBIC INCHES, terminal_type: TAB, SOLDER LUGTAB, SOLDER LUG. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-148-3000, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ AL-5ER-0.0511

NSN: 5905-01-148-3000
FSC: 5905 — Resistor
CAGE: 54294 — SHALLCROSS INC (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY HEAT SINK
body_width	0.335 INCHES NOMINAL0.335 INCHES NOMINAL IN
body_height	0.321 INCHES NOMINAL0.321 INCHES NOMINAL IN
body_length	0.600 INCHES NOMINAL0.600 INCHES NOMINAL IN
cubic_measure	0.058 CUBIC INCHES0.058 CUBIC INCHES
terminal_type	TAB, SOLDER LUGTAB, SOLDER LUG
inclosure_type	ENCASEDENCASED
terminal_width	0.085 INCHES NOMINAL0.085 INCHES NOMINAL IN
heat_sink_width	4.000 INCHES4.000 INCHES IN
terminal_length	0.262 INCHES NOMINAL0.262 INCHES NOMINAL IN
heat_sink_height	2.000 INCHES2.000 INCHES IN
heat_sink_length	6.000 INCHES6.000 INCHES IN
NSN	5905-01-148-3000

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000-1.000 TO 1.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -90.0 TO 90.0-90.0 TO 90.0

•

ELECTRICAL RESISTANCE: 0.0511 OHMS0.0511 OHMS

•

INCLOSURE TYPE: ENCASEDENCASED

•

MOUNTING HOLE SIZE: 0.094 INCHES NOMINAL0.094 INCHES NOMINAL IN

•

TERMINAL TYPE: TAB, SOLDER LUGTAB, SOLDER LUG

•

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH: 0.445 INCHES NOMINAL0.445 INCHES NOMINAL IN

•

HEAT SINK THICKNESS: 0.040 INCHES0.040 INCHES IN

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-1.000 TO 1.000-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-90.0 TO 90.0-90.0 TO 90.0
ELECTRICAL RESISTANCE	0.0511 OHMS0.0511 OHMS
INCLOSURE TYPE	ENCASEDENCASED
MOUNTING HOLE SIZE	0.094 INCHES NOMINAL0.094 INCHES NOMINAL IN
TERMINAL TYPE	TAB, SOLDER LUGTAB, SOLDER LUG
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	0.445 INCHES NOMINAL0.445 INCHES NOMINAL IN
HEAT SINK THICKNESS	0.040 INCHES0.040 INCHES IN
TERMINAL LENGTH	0.262 INCHES NOMINAL0.262 INCHES NOMINAL IN
BODY WIDTH	0.335 INCHES NOMINAL0.335 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 3

10127463Reference document

Same NSN cross-reference

Reference document — Informative reference only

85946900-05Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

85976800-05Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AL-5ER-0.0511?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AL-5ER-0.0511?

AL-5ER-0.0511 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace AL-5ER-0.0511?

There are 3 known substitutes for AL-5ER-0.0511: 10127463, 85946900-05, 85976800-05. Substitute compatibility should be verified for your specific system.

What is the NSN for AL-5ER-0.0511?

AL-5ER-0.0511 is cataloged in the U.S. Government catalog under NSN 5905-01-148-3000. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AL-5ER-0.0511 — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — AL-5ER-0.0511