PartsTable
Technical Data Sheet
Download PDF

AIC943-4-6-8 — PIN,DRIVE,GUIDED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AIC943-4-6-8: PIN,DRIVE,GUIDED.

The PIN,DRIVE,GUIDED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, shank_length: 0.375 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.405 INCHES NOMINAL IN, overall_length: 1.43 INCHES NOMINAL IN, shank_diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-614-8845, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AIC943-4-6-8
NSN: 5315-01-614-8845
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 06725 — SPS TECHNOLOGIES, LLC DBA AIR INDUSTRIES COMPANY DIV AIR INDUSTRIES COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
shank_length0.375 INCHES NOMINAL IN
thread_class3A A
thread_length0.405 INCHES NOMINAL IN
overall_length1.43 INCHES NOMINAL IN
shank_diameter0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
style_designatorGUIDED OR POWDER ACTUATED
thread_directionRIGHT-HAND
material_thickness0.125 INCHES NOMINAL IN
nominal_thread_size0.250 INCHES IN
washer_outside_diameter0.506 INCHES NOMINAL IN
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF)
NSN5315-01-614-8845
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AIC943-4-6-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
•
WASHER OUTSIDE DIAMETER: 0.506 INCHES NOMINAL IN
•
THREAD LENGTH: 0.405 INCHES NOMINAL IN
•
SHANK LENGTH: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: GUIDED OR POWDER ACTUATED
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.506 INCHES NOMINAL IN
THREAD LENGTH0.405 INCHES NOMINAL IN
SHANK LENGTH0.375 INCHES NOMINAL IN
STYLE DESIGNATORGUIDED OR POWDER ACTUATED
OVERALL LENGTH1.43 INCHES NOMINAL IN
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
SHANK LENGTH UNDER WASHER0.625 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
03A259-4-6-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AIC943-4-6-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AIC943-4-6-8?
AIC943-4-6-8 is a PIN,DRIVE,GUIDED.
What parts can replace AIC943-4-6-8?
There is 1 known substitute for AIC943-4-6-8: 03A259-4-6-8. Substitute compatibility should be verified for your specific system.
What is the NSN for AIC943-4-6-8?
AIC943-4-6-8 is cataloged in the U.S. Government catalog under NSN 5315-01-614-8845. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AIC943-4-6-8