PartsTable
Technical Data Sheet
Download PDF

AIC82-5-8 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

AIC82-5-8: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.573 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, thread_length: 0.351 INCHES MINIMUM IN, screw_material: STEEL COMP H11, fastener_length: 0.851 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-920-0587, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AIC82-5-8
NSN: 5305-00-920-0587
FSC: 5305 — Screws
CAGE: 06725 — SPS TECHNOLOGIES, LLC DBA AIR INDUSTRIES COMPANY DIV AIR INDUSTRIES COMPANY (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.573 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
thread_length0.351 INCHES MINIMUM IN
screw_materialSTEEL COMP H11
fastener_length0.851 INCHES NOMINAL IN
hardness_rating46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleTORQUE SET
nominal_thread_diameter0.312 INCHES IN
screw_surface_treatmentCADMIUM
NSN5305-00-920-0587
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AIC82-5-8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.851 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS6485 ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.351 INCHES MINIMUM IN
•
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.851 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS6485 ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.351 INCHES MINIMUM IN
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP H11
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
SFT22-5A8Reference document
Same NSN cross-reference
Reference document — Secondary reference
C082-5-8Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AIC82-5-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AIC82-5-8?
AIC82-5-8 is a SCREW,MACHINE.
What parts can replace AIC82-5-8?
There are 2 known substitutes for AIC82-5-8: SFT22-5A8, C082-5-8. Substitute compatibility should be verified for your specific system.
What is the NSN for AIC82-5-8?
AIC82-5-8 is cataloged in the U.S. Government catalog under NSN 5305-00-920-0587. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AIC82-5-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.