AIC1654-3D12 — BOLT,SHEAR

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

AIC1654-3D12: BOLT,SHEAR.

The BOLT,SHEAR is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 OVERALL, head_style: SPLINE EXTENDED WASHER, grip_length: 0.750 INCHES NOMINAL IN, head_height: 0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-656-2584, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AIC1654-3D12

NSN: 5306-01-656-2584
FSC: 5306 — Bolts
CAGE: 06725 — SPS TECHNOLOGIES, LLC DBA AIR INDUSTRIES COMPANY DIV AIR INDUSTRIES COMPANY (USA)

SPECIFICATIONS

material	NICKEL ALLOY 718 OVERALL
head_style	SPLINE EXTENDED WASHER
grip_length	0.750 INCHES NOMINAL IN
head_height	0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
thread_class	3A A
grip_diameter	0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
hole_quantity	1
thread_length	0.367 INCHES NOMINAL IN
surface_finish	32.0 MICROINCHES BEARING SURFACE OF HEAD
fastener_length	1.102 INCHES MINIMUM AND 1.132 INCHES MAXIMUM IN
special_features	DOUBLE SHEAR LBS MIN 7100; 100 PERCENT FLUORESCENT PENETRANT INSPECT PER MIL-STD-6866; ULTIMATE TENSILE LBS MIN 4770
thread_direction	RIGHT-HAND
NSN	5306-01-656-2584

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 32.0 MICROINCHES GRIP

•

EXTENDED WASHER THICKNESS: 0.113 INCHES NOMINAL IN

•

HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.102 INCHES MINIMUM AND 1.132 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED STD SINGLE TREATMENT RESPONSE OVERALL

•

EXTENDED WASHER DIAMETER: 0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES HEAD
EXTENDED WASHER THICKNESS	0.113 INCHES NOMINAL IN
HEAD HEIGHT	0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
FASTENER LENGTH	1.102 INCHES MINIMUM AND 1.132 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED STD SINGLE TREATMENT RESPONSE OVERALL
EXTENDED WASHER DIAMETER	0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
THREAD LENGTH	0.367 INCHES NOMINAL IN
SHANK UNTHREADED HOLE DIAMETER	0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM ALL HOLES IN

OTHER ITEMS IN FSC 5306 — Bolts

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017

SUBSTITUTES & CROSS-REFERENCES 3

VS3318-3D12Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

SLB187-3D12Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

03A099-3D12Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy AIC1654-3D12?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AIC1654-3D12?

AIC1654-3D12 is a BOLT,SHEAR.

What parts can replace AIC1654-3D12?

There are 3 known substitutes for AIC1654-3D12: VS3318-3D12, SLB187-3D12, 03A099-3D12. Substitute compatibility should be verified for your specific system.

What is the NSN for AIC1654-3D12?

AIC1654-3D12 is cataloged in the U.S. Government catalog under NSN 5306-01-656-2584. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AIC1654-3D12 — BOLT,SHEAR

Request a Quote — AIC1654-3D12