PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AIA/NAS NAS834
AIA/NAS NAS834 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The AIA/NAS NAS834 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-109-7061, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AIA/NAS NAS834
NSN: 5340-01-109-7061
FSC: 5340
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
Part NumberAIA/NAS NAS834
NSN5340-01-109-7061
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AIA/NAS NAS834 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPEN END INSIDE DIAMETER: 0.164 INCHES MINIMUM AND 0.184 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, GRADE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
CLOSED END OVERALL DIAMETER: 0.292 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
LENGTH UNDER SHOULDER: 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OPEN END INSIDE DIAMETER0.164 INCHES MINIMUM AND 0.184 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-390, TYPE 1, GRADE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
MATERIALPLASTIC, POLYETHYLENE (PP)
CLOSED END OVERALL DIAMETER0.292 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
LENGTH UNDER SHOULDER0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
102C1279-1Upgraded Successor
successor cross-reference
successor
8028447Upgraded Successor
successor cross-reference
successor
353122-4Upgraded Successor
successor cross-reference
successor
M5501/7-F2Upgraded Successor
successor cross-reference
successor
MIL-C-5501/7Upgraded Successor
successor cross-reference
successor
M5501/7-F6Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AIA/NAS NAS834?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AIA/NAS NAS834?
AIA/NAS NAS834 is a AIA/NAS NAS834.
What parts can replace AIA/NAS NAS834?
There are 23 known substitutes for AIA/NAS NAS834: 102C1279-1, 8028447, 353122-4 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AIA/NAS NAS834?
AIA/NAS NAS834 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-109-7061. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AIA/NAS NAS834

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026