PartsTable
Technical Data Sheet
Download PDF

AH3084D — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AH3084D: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, design_type: THREADED, thread_class: 2B, overall_diameter: 0.438 INCHES NOMINAL IN, special_features: ONE 0.045 IN. DIA HOLE DRILLED THRU CENTER OF CLOSED END IN, inside_diameter_length: 0.375 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-664-5865, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AH3084D
NSN: 5340-00-664-5865
FSC: 5340 — Hardware, Commercial
CAGE: 61349 — AMETEK, INC. DIV AEROSPACE & DEFENSE (USA)
SPECIFICATIONS
materialPLASTIC
design_typeTHREADED
thread_class2B
overall_diameter0.438 INCHES NOMINAL IN
special_featuresONE 0.045 IN. DIA HOLE DRILLED THRU CENTER OF CLOSED END IN
inside_diameter_length0.375 INCHES NOMINAL IN
end_item_identificationW/S:AIRCRAFT, HERCULES C-130F; AIRCRAFT, HERCULES KC-130
round_cap_outside_surface_conditionRIBBED
thread_size_and_series/type_designator5/16-24 UNF
NSN5340-00-664-5865
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AH3084D MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: THREADED
•
OVERALL DIAMETER: 0.438 INCHES NOMINAL IN
•
THREAD CLASS: 2B
•
MATERIAL: PLASTIC
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 5/16-24 UNF
•
INSIDE DIAMETER LENGTH: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DESIGN TYPETHREADED
OVERALL DIAMETER0.438 INCHES NOMINAL IN
SPECIAL FEATURESONE 0.045 IN. DIA HOLE DRILLED THRU CENTER OF CLOSED END IN
THREAD CLASS2B
END ITEM IDENTIFICATIONW/S:AIRCRAFT, HERCULES C-130F; AIRCRAFT, HERCULES KC-130
MATERIALPLASTIC
THREAD SIZE AND SERIES/TYPE DESIGNATOR5/16-24 UNF
INSIDE DIAMETER LENGTH0.375 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONRIBBED
SUBSTITUTES & CROSS-REFERENCES 1
1604-163Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AH3084D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AH3084D?
AH3084D is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace AH3084D?
There is 1 known substitute for AH3084D: 1604-163. Substitute compatibility should be verified for your specific system.
What is the NSN for AH3084D?
AH3084D is cataloged in the U.S. Government catalog under NSN 5340-00-664-5865. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AH3084D