PartsTable
Technical Data Sheet
Download PDF

AGS1186-8 — PACKING WITH RETAINER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AGS1186-8: PACKING WITH RETAINER.

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC PACKING, construction: ONE-PIECE, outside_diameter: 1.125 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN, surface_treatment: CADMIUM RETAINER, retainer_thickness: 0.092 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN, packing_inside_diameter: 0.843 INCHES MINIMUM AND 0.851 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-482-6963, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AGS1186-8
NSN: 5330-00-482-6963
FSC: 5330 — Packing and Gasket Materials
CAGE: K7766 — BSI STANDARDS LIMITED (GBR)
SPECIFICATIONS
materialRUBBER SYNTHETIC PACKING
constructionONE-PIECE
outside_diameter1.125 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
surface_treatmentCADMIUM RETAINER
retainer_thickness0.092 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
packing_inside_diameter0.843 INCHES MINIMUM AND 0.851 INCHES MAXIMUM IN
material_document_and_classificationNACCR 190 TY 2 FSCM K0195 MFR REF SINGLE MATERIAL RESPONSE PACKING
packing_ring_cross-sectional_diameter0.112 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN
NSN5330-00-482-6963
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AGS1186-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING INSIDE DIAMETER: 0.843 INCHES MINIMUM AND 0.851 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.125 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.112 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: NACCR 190 TY 2 FSCM K0195 MFR REF SINGLE MATERIAL RESPONSE PACKING
•
RETAINER THICKNESS: 0.092 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM RETAINER
•
MATERIAL: RUBBER SYNTHETIC PACKING
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS
PACKING INSIDE DIAMETER0.843 INCHES MINIMUM AND 0.851 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.125 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
PACKING RING CROSS-SECTIONAL DIAMETER0.112 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONNACCR 190 TY 2 FSCM K0195 MFR REF SINGLE MATERIAL RESPONSE PACKING
RETAINER THICKNESS0.092 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM RETAINER
MATERIALRUBBER SYNTHETIC PACKING
CONSTRUCTIONONE-PIECE
SUBSTITUTES & CROSS-REFERENCES 1
AGS1186DReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AGS1186-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AGS1186-8?
AGS1186-8 is a PACKING WITH RETAINER.
What parts can replace AGS1186-8?
There is 1 known substitute for AGS1186-8: AGS1186D. Substitute compatibility should be verified for your specific system.
What is the NSN for AGS1186-8?
AGS1186-8 is cataloged in the U.S. Government catalog under NSN 5330-00-482-6963. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AGS1186-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.